24/7 is a highly advanced floor finish with a superior "off-the-mop"
initial gloss. Utilizing exclusive Micro-Molecular Polymer Technology,
24/7 provides exceptional film clarity, repels soils and scratches, and
extends the time between stripping cycles from 18 to 36 months.
Classified by Underwriters Laboratories® for slip resistance.
Floor Preparation: Strip old finish and wax
using your preferred NCL floor stripper following label directions. For
baseboards and corners, use an NCL baseboard stripper following label
directions. If necessary, rinse thoroughly with clean water and allow to
Application: Using a clean mop or applicator apply a
thin uniform coat of 24/7® Extended Performance Floor Finish. Allow to
dry for a minimum of 30 minutes after each coat. Do not apply more than 4
coats in a 24 hour period. Floor should be thoroughly dry before
traffic is allowed in area.
Buffing and Burnishing: 24/7® Extended Performance
Floor Finish is an ideal product for use in no-buff or buffing programs
using all speeds of buffing or burnishing machines. Prior to buffing or
burnishing dust mop the floor surface using an NCL dust mop treatment.
Buff or dry burnish using an NCL Aqua Magic™ buffing pad. For spray
buffing, mop-on or autoscubber restoring use a preferred NCL gloss
Routine Maintenance: Dust mop using mop treated with
an NCL dust mop treatment. Damp mop or clean with an automatic scrubber
using your preferred NCL neutral floor cleaner following label
Scrub and Recoat: When routine maintenance and
buffing/burnishing no longer responds as needed, scrub and recoat using
an NCL scrub and recoat cleaner following label directions.