Picker Icon

Select Your Style

Choose your layout

Color scheme

  • No product(s) in your cart!

ENDURE™ Heavy Duty Bonnet & Traffic Lane Cleaner


Heavy Duty Bonnet & Traffic Lane Cleaner

Offers superb cleaning performance for the most difficult bonnet and traffic lane cleaning tasks. Powerful solvents and soil solubilizers remove even ground-in dirt from carpet fibers.

Product Details


There are no reviews yet.

Be the first to review “ENDURE™ Heavy Duty Bonnet & Traffic Lane Cleaner”

Your email address will not be published. Required fields are marked *

About ENDURE™ Heavy Duty Bonnet & Traffic Lane Cleaner

  1. Pretest carpet for colorfastness in an inconspicuous area.
  2. Remove furniture and dry vacuum thoroughly.
  3. In a pump-up or pressure sprayer, mix ENDURE™ solution according to the recommendations listed below.
  4. Spray diluted cleaning solution onto carpet in 6’ x 12’ sections.
  5. For heavy soiling conditions let solution dwell for 10 minutes.
  6. Immerse bonnet in water and wring out thoroughly, then place bonnet on machine.
  7. Scrub carpet and change bonnet pad as it becomes soiled.
DILUTION CHART: Light Soils: 1:64 (2 oz./gal) Moderate: 1:16 (8 oz./gal) Heavy: 1:32 (4 oz./gal)TRAFFIC LANE CLEANING
  1. In a pump-up or pressure sprayer, dilute ENDURE™ at a rate of 1:16 (8 oz per gallon of water).
  2. Spray onto traffic lanes at a rate of 500-600 sq. ft. per gallon of diluted product. DO NOT OVER WET THE CARPET.
  3. Allow to set for 5-10 minutes.
  4. Extract, Brush/Bonnet as desired.
NOTE: Due to the variety of carpeting materials this product should be tested at recommended use dilution in an inconspicuous area. Use clean cloth or sponge for application and if test area indicates bleeding, color removal, carpet shrinkage or deterioration of adhesive, do not use. NOTE: Do not use on wool carpeting.